GYTA53 Armored Direct Buried Cable

 

In the GYTA53 cable, singlemode/multimode fibers are positioned in the loose tubes,the tubes are filled with water blocking filling compound. Tubes and fillers are stranded around the strength member into a circular cable core. An Aluminum Polyethylene Laminate(APL) is applied around the core. Which is filled with the filling compound to protect it. Then the cable is completed with a thin PE sheath. After PSP is applied over the inner sheath, the cable is completed with a PE outer sheath.


  • Place Of Origin: Guangdong, China
  • Product Name: Direct Buried Fiber Optical Cable
  • Acket Material: HDPE/AT Sheath
  • Cores Number: 2~288cores
  • Fiber Type: G652D; G655C; 657A1; 50/125; 62.5/125; OM3; OM4 As Options
  • Product Detail

    Packaging & Shipping

    Product Tags

    Cable Cross -Section

    GYTA53

    Application: 

    Aerial/Duct/Outdoor

    Characteristic:

    1. The following measures are taken to ensure the water blocking performance of the cable.
    2. Single steel wire used as the central strength Member.
    3. Special water-blocking filling compound in the loose tube.
    4. 100% cable core filling,APL and PSP moisture barrier.

    Temperature Rage:

    Operating :-40℃ to +70℃ Storage :-40℃ to +70℃

     Standards:

    Comply with stand YD/T 901-2009 as well as IEC 60794-1

    Technical Parameters:

    Cable Type             (increased by 2fibers) Fiber Count Cable Diameter (mm) Cable Weight (kg/km) Tensile Strength Long/Short Term( N) Crush ResistanceLong/Short Term (N/100mm) Bending RadiusStatic/ Dynamic (mm)
    GYTA53 2 ~ 36 2 ~ 36 13.7 190 1000/3000 1000/3000 10D/20D
    GYTA53 38 ~ 72 38 ~ 72 15.3 229 1000/3000 1000/3000 10D/20D
    GYTA53 74~96 74~96 15.9 244 1000/3000 1000/3000 10D/20D
    GYTA53 98 ~120 98 ~120 18.0 288 1000/3000 1000/3000 10D/20D
    GYTA53 122 ~144 122 ~144 19.2 325 1000/3000 1000/3000 10D/20D

  • Previous:
  • Next:

  • Packing and Marking:

    • Each single length of cable shall be reeled on Fumigated Wooden Drum
    • Covered by plastic buffer sheet
    • Sealed by strong wooden battens
    • At least 1 m of inside end of cable will be reserved for testing.
    • Drum length: Standard drum length is 3,000m±2%; as required
    • 5.2 Drum Marking(can according to the requirement in the technical specification) Manufacturer name;
    • Manufacturing year and month Roll—direction arrow;
    • Drum length; Gross/net weight;

    Packaging and Shipping:

    packaging & shipping

    Leave Your Message

    Write your message here and send it to us