Specifications:
| Fiber Core | 24/48/72/96/144 | |
| Fiber Optic Splice Try(core/tray) | 48(24 slots/tray) | |
| Splice Tray Number (piece) | 1/1/2/2/3 | |
| Fiber Port | 2 Input ports, 2 output ports | |
| Pole Mount Steel Tape | Material | Stainless steel 304 |
| Dimension (mm) | 20(Width) 0.7(Thickness) | |
| Tightness (Kpa) | 100 | |
| Tensile Strength (N) | 2000 | |
| Crush Resistance (N/10cm) | 2000 | |
| Working Temperature (C) | -40 ~ 60 | |
| Material | Aluminum Alloy | |
| Dimensions (mm) | 480 (H) x 200 | |
Application:
The scope of application is:aerial, wall-mounting etc.
The ambient temperature ranges from –40°Cto +65°C.
OPGW Accessories Hardware:
junction box is mainly used for protecting the fiber optic junction between two cables and reserve a section of fiber optic for maintenance in the box. The box has good leakproofness, anti-water and damp-proof feature and can not corroded in the power line.
Joint box2. Suspension Clamp
Assembly with reinforced suspension clamp and neoprene inner covering ,especially designed for OPGW cables includes grounding clamps for tower connection .
Suspension clamp(Single) Suspension clamp(Double)
Structure
> straight shackle –( Galvanized forged steel)
> Parallel connection clamp —(Aluminum)
> Armour grid suspension clamp–(Aluminum)
> Preformed rods —(Aluminum Alloy)
> Grounding clamp —(Aluminum )
3. Dampers
The dampers are used to absorb the cable vibrations , The number of dampers is determined by the environmental conditions, the distance between towers, the type of OPGW cable and the installation parameters
Vibration damper
Structure
> Securing clamp (Aluminum alloy )
> Messenger cable –(Galvanized steel wire)
> Counter weights–( Galvanized forged steel)
4.Down-lead Clamp
The down-lead clamp clamps are used to fix the cable to the tower in the down lead to the joint box
Wire Clamp for tower Wire Clamp for pole
Structure
1. Clamp–(Aluminum )
2. M-12-rod-(Galvanized steel )
3. Support body –(Galvanized steel )
4. Lock screw—( stainless steel )
5.Tension Assembly
Preformed tension especially designed for OPGW cable Includes grounding clamps for tower connection ,when the distance between two anchor towers is greater than maximum length of OPGW cable drums, there are special tension assemblies for installation in suspension towers, allowing a cable joint to be included.
Dead-end fitting( Single)
Structure
1. Straight shackle -( Galvanized fogged steel)
2. Extension Link( Galvanized laminated steel )
3. Dead end –(Compression aluminum clad steel)
4. Thimble —(Cast galvanized steel)
5. Protection Splice–(Compression aluminum clad steel)
6. Ground clamp –(Aluminum)
Configuration
There are three types of assemblies for installation in tension towers :
1.Passing tension assembly : for intermediate towers
2.Splicing tension assembly : for towers with joint boxes
3.Final tension assembly : for final towers
Noted: More Hardware accessories are available on customer’s request.
Application:
Package
11
